PRODUCT DESCRIPTION
Advertised Duration 280/280, Lift .480/.480
Cam Style:
Hydraulic flat tappet
Basic Operating RPM Range:
2,500-6,000
Intake Duration at 050 inch Lift:
230
Exhaust Duration at 050 inch Lift:
230
Duration at 050 inch Lift:
230 int./230 exh.
Advertised Intake Duration:
280
Advertised Exhaust Duration:
280
Advertised Duration:
280 int./280 exh.
Intake Valve Lift with Factory Rocker Arm Ratio:
0.480 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio:
0.480 in.
Valve Lift with Factory Rocker Arm Ratio:
0.480 int./0.480 exh.
Lobe Separation (degrees):
110
Grind Number:
280H
Computer-Controlled Compatible:
No
Lifters Included:
Yes
Lifter Style:
Hydraulic flat tappet
Valve Springs Included:
No
Retainers Included:
No
Locks Included:
No
Valve Stem Seals Included:
No
Timing Chain and Gears Included:
No
Assembly Lubricant Included:
Yes
Pushrods Included:
No
Rocker Arms Included:
No
Gaskets Included:
No
Valve Springs Required:
Yes
Quantity:
Sold as a kit.
Designed for hot street/strip cars, COMP Cams Magnum series cam and lifter kits require a higher compression ratio, rear-end gear ratio, and stall torque converter than stock. With a very aggressive profile, these Magnum hydraulic cam and lifter kits provide maximum top-end performance for your high performance car.
