PRODUCT DESCRIPTION
Fits: 273-360 & Magnum
ELECTRIC PUMP MOPAR SB, STANDARD
American made with quality far superior to any other performance aftermarket company, we build these WP114 Mopar Small Block pumps with pride right here in the USA. Don't be mislead by inflated flow numbers and competitors' outlandish claims. We say what we mean and mean what we say. Our 2 year, unlimited mileage guarantee and full satisfaction money back guarantee should convince you that buying Meziere is buying value!
WP114 water pump model features:
Fits small block Mopar
Suitable for street or drag strip use – 2400+ hour life expectancy
Show quality finish
Optional heavy duty motor provides 42 gallons per minute free flow rating
Optional heavy duty motor provides 3000+ hour life expectancy
All stainless steel hardware included
Light weight. Complete standard small block Mopar unit weighs only 5.7 pounds!
Stainless steel large diameter main shaft with high performance ceramic seal
Pump will clear cam belt drives and most blower drives
1" NPT inlet adapters are available for #12AN, #16AN, #20AN, 1¼", 1½" or 1¾" slip hose
Specs for WP114
Belt Drives: Standard SBM design will clear Jesel belt drives and comparable belt drive systems.
Distributer Belt Drives: Spacers will be necessary to clear belt drive distributor systems.
Finishing The System: This pump is supplied complete with gaskets and hardware but without the inlet fitting. The fitting needs to be ordered according to the size of the lower radiator hose.
Finishing The System: A back plate may be necessary if this pump is being mounted to a stock timing cover. See Accessory WP115 and WP117
Amperage draw: Under normal use the pump will draw 6-7 amps.
Overall Height Dimension: The standard pump is 6.1" long from the mounting surface to the tip of the pump.
Pump Weight: This application weighs 5.7 lbs.
16 volt systems: The 12 volt pump will work for limited use applications. The pump should not be powered while charging your 16 volt system.
Additional Notes: The standard 35 GPM pump is suitable for normally aspirated engines up to 650HP. Supercharged, Turbocharged and high compression, high horsepower applications should use the 55GPM High Flow pump only.
This model does not accept heater or bypass hoses as a standard. These may be added at the factory for an additional cost. Please call for details.
