PRODUCT DESCRIPTION
Fits: DragPak - Race Application
In stock and ready for your Drag Pak or extreme street car or bracket racer.
These aluminum G3 HEMI Blocks are designed, engineered, cast, and machined to support over 1500 horsepower while shedding unwanted pounds off the frontend.
Available with standard or unfinished lifter bores and with or without VCT Solenoid provisions.
These blocks are cast with ears to use production style engine mounts and maintain the stock G3 HEMI bellhouse bolt-pattern to accept Mopar small-block 727/904 transmissions along with current style NAG1 and A8 TorqueFlite units.
These new aluminum G3 HEMI Blocks weigh approximately 125-pounds with main caps.
DRAG PAK BLOCK (RACE)
9.25 Deck Height
6.1L Style Timing Drive, No VCT Solenoid
.937 Keyway lifter bushings, require finish hone
60mm Raised Cam Bore, Cam B PN. P5160272AA Bearings not included
Delivered w/ 4.120 bores, require finish honing to 4.125
4140 q/t billet main caps
4 Bolt Main Cap 1 & Main Cap 5, 6-Bolt for Main Caps 2, 3, 4
6 Head Studs Available
